酪素基rGO复合乳液的制备及其阻燃性能

为制备具有增强阻燃效果的皮革涂饰材料,首先以天然石墨为原料,采用Hummers法制备氧化石墨烯(GO),并采用NaBH4对其进行还原得到还原氧化石墨烯(rGO).通过FTIR,XRD和TEM等对其进行表征.结果表明,成功制备了rGO纳米材料.随后,采用物理共混法将rGO引入天然蛋白质酪素体系,制备酪素基rGO复合乳液并将其应用于皮革涂饰,对涂饰后革样的阻燃性能、力学性能和耐干湿擦性能进行测试.结果表明,当rGO的含量为酪素体系溶质质量的0.5％时,与未含rGO的酪素体系相比,涂饰后革样的燃烧速率下降47.2％,极限氧指数(LOI)由24.2％增加至26.3％,热释放速率(HRR)下降53.1％,总热释放速率(THR)也有所降低.rGO的引入对涂饰后革样的力学性能和耐干湿擦性能影响不大.     

Simulations of NBI fast ion loss in the presence of toroidal field ripple on EAST

NBI fast ion losses in the presence of the toroidal field ripple on EAST have been investigated by using the orbit code GYCAVA and the NBI code TGCO. The ripple effect was included in the upgraded version of the GYCAVA code. It is found that loss regions of NBI fast ions are mainly on the low field side near the edge in the presence of ripple. For co-current NBIs, the synergy effect of ripple and Coulomb collision on fast ion losses is dominant, and fast trapped ions located on the low field side are easily lost. The ripple well loss and the ripple stochastic loss of fast ions have been identified from the heat loads of co-current NBI fast ions. The ripple stochastic loss and the collisioninduced loss are much larger than the ripple well loss. Heat loads of lost fast ions are mainly localized on the right side of the radio frequency wave antennas from the inside view toward the first wall. For counter-current NBIs, the first orbit loss due to the magnetic drift is the dominant loss channel. In addition, fast ion loss fraction with ripple and collision for each NBI linearly increases with the effective charge number, which is related to the pitch angle scattering effect.     

淀粉预糊化温度对肉粉肠品质特性的影响和机制研究

绿豆淀粉的预糊化是肉粉肠区别于其他熏煮香肠的关键加工工艺，因此，预糊化淀粉的温度对产品的品质至关重要。本研究将绿豆淀粉分别用75、85、95 ℃的热水进行预糊化后制备肉粉肠，探讨不同的预糊化温度对产品品质和淀粉糊化度（Degree of Starch Gelatinization，DSG）的影响。实验结果表明，随着预糊化淀粉温度的升高，肉粉肠的DSG和乳化稳定性显著增加（P<0.05），蒸煮损失显著降低（P<0.05），且大量自由水向不易流动水转变。同时，随预糊化淀粉温度的增加，肉粉肠的硬度、回复性、弹性、脆性、咀嚼性、致密性和亮度值（Lightness，L*）均显著增加（P<0.05），促进产品最终品质的形成。总体可接受评分在95 ℃的预糊化温度时达到最高（P<0.05）。此外，聚类分析（Hierarchical Cluster Analysis，HCA）结果表明，95 ℃的预糊化温度对肉粉肠的品质特性有上调的影响。综上所述，95 ℃是提高肉粉肠品质的最佳预糊化淀粉温度。     

改进的CAGAN在虚拟试衣中的应用

针对CAGAN（Conditional Analogy GAN）换衣后效果模糊，在目标衣服与原始衣服长短不一致时效果一般，相对目标衣服保留过少的细节等问题做了相关研究并对CAGAN进行了改进，提出了新的虚拟试衣方式。经过改进的CAGAN生成一个粗糙的结果，由该结果得到目标衣服穿在模特身上改变形状后的mask，接下来利用mask对目标衣服进行变形，综合变形的衣服和第一步的结果便得到最终的试衣图像。实验结果表明，该方法解决了前面存在的问题，而且取得了非常好的效果。     

白酒人工催陈技术研究进展

白酒自然陈酿具有周期长、占地面积大和投资成本高等问题，因此白酒人工催陈技术受到了广泛的关注。目前白酒人工催陈技术主要包括物理催陈、化学催陈和生物催陈等，其中，物理催陈和生物催陈应用潜力较大，这些技术的应用可以大幅度缩短储存时间，提高白酒品质，降低生产成本。本文从白酒陈酿机理、储存条件出发，综述中国白酒人工催陈技术的研究现状，并对不同的催陈技术及其应用前景进行了分析和比较，旨在为今后白酒人工催陈的研究提供参考和借鉴。     

一种最小变形度全景视频映射方法

全景视频需要经过采样映射转换成平面矩形视频,以便后续的压缩编码.针对现有映射方法存在的内容变形和采样不均匀问题,提出一种最小变形度映射方法(Minimum Deformation Projection,MDP).首先提出新的变形度计算公式求得最优解,其次结合像素排列为矩形的要求和人工边界等因素对最优解做近似,最后得到了最优的多边形映射形状和像素排列方案.实验数据表明,MDP的采样密度更均匀,结合使用x265,相对于ERP可以获得约14.47％的增益,优于其他映射方法.     

一种带有浮体下水防挤拉功能的水上光伏浮体阵列的研制

文章针对水上光伏电站浮体阵列挤拉组件受损的问题,研制出一种新型带有浮体下水防挤拉功能的水上光伏浮体阵列的连接装置,并提出三种方案进行定性定量分析,选取最佳方案为"限位盒"结构,并对最佳方案进行细化,确定基本结构.通过在现有工程中进行技术推广,并跟踪使用效果,结果表明:新装置提高了施工效率,降低了施工成本,效益显著.     

The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

电网设备线夹开裂原因

某电力公司变电站用铝合金设备线夹在运行过程发生批次开裂事故,通过宏观观察、断口分析、化学成分分析、力学性能测试、冷冻模拟试验等方法,对设备线夹的开裂原因和开裂机理进行了分析。结果表明:设备线夹焊缝存在焊接缺陷,导致焊缝强度下降;设备线夹接线管底部存在积水空间,寒冷天气下积水结冰,体积膨胀,使焊缝承受设计工况外的负载而过载开裂,造成了线夹开裂。     

PVC-O管材双轴取向工艺PLC控制系统的设计

简述了PVC-O管材的生产方法.结合PVC-O管材一步加工法的生产特点,开发了PVC-O管材双轴取向工艺的PLC控制系统.阐述了该控制系统的设计方案及控制方法.